SAMSUNG S5 (G900F) Clone Super Copy Firmwares Back up by original Phone and can flashing with SP Flash tool.
Some problems must to flshing with original stock firmware :
Phone hit by virus apk
Dead phone after reset
Boot Loop / Stuck on Loop
Lost baseband no signal
Blue screen after reset with CWM / TWRP recovery
Samsung Galaxy S5 Clone Phone Back Cover Information :
Samsung galaxy s5 g900f super copy / clone 1 sim mt6572
S/N : SM-900F RF8F30M3G1024
FCCID : A3SMG900F
===============================================
Phone Informations checking with adb use Miracle Box Software :
Connecting to Phone,Wait..ok
Hardware:mt6572
Board:msm8974
CPU ABI:armeabi-v7a
Manufacturer:samsung
Model:sm-g900
Android Ver:4.4.2
bootloader ver:unknown
USB config:mass_storage,adb
User:se.infra
FS:unknown
Baseband ver:moly.wr8.w1315.md.wg.mp.v1, 2013/07/04 15:16
Build number:kot49h.g900dkeu1ancc
ID:kot49h
Region:us
Language:en
Chipset:msm8974
IMEI1:22222xxxx222222
Root: Rooted
Done
===============================================================
||Download Firmware => Download Now | Password : www. ||
===============================================================
Learn more tutorial Full image => Tutorials how to use SP Flashtool
How to Flash Samsung S5 (G900F) Clone MTK6572 with Sp flash tool ?
Step 1: Unduh and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Unduh Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Hope can solved your problem, and always check ours new update :D
Some problems must to flshing with original stock firmware :
Phone hit by virus apk
Dead phone after reset
Boot Loop / Stuck on Loop
Lost baseband no signal
Blue screen after reset with CWM / TWRP recovery
Samsung Galaxy S5 Clone Phone Back Cover Information :
Samsung galaxy s5 g900f super copy / clone 1 sim mt6572
S/N : SM-900F RF8F30M3G1024
FCCID : A3SMG900F
===============================================
Phone Informations checking with adb use Miracle Box Software :
Connecting to Phone,Wait..ok
Hardware:mt6572
Board:msm8974
CPU ABI:armeabi-v7a
Manufacturer:samsung
Model:sm-g900
Android Ver:4.4.2
bootloader ver:unknown
USB config:mass_storage,adb
User:se.infra
FS:unknown
Baseband ver:moly.wr8.w1315.md.wg.mp.v1, 2013/07/04 15:16
Build number:kot49h.g900dkeu1ancc
ID:kot49h
Region:us
Language:en
Chipset:msm8974
IMEI1:22222xxxx222222
Root: Rooted
Done
===============================================================
||Download Firmware => Download Now | Password : www. ||
===============================================================
Learn more tutorial Full image => Tutorials how to use SP Flashtool
How to Flash Samsung S5 (G900F) Clone MTK6572 with Sp flash tool ?
Step 1: Unduh and extract the stock firmware on your computer.
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Unduh Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
Hope can solved your problem, and always check ours new update :D
