Samsung Galaxy J1 SM-J100H Clone Firmware for flashing to fix any boot loop, hank , blue screen, stuck on logo, fix virus and trojan android.
Phone Hardware / Software for SM-J100H Clone Identification :
HARDWARE:MT6572 BOARD:SC7727SCPU ABI:ARMEABI-V7A
MANUFACTURER:SAMSUNG
MODEL:SM-J100H
ANDROID VER:4.4.2
BOOTLOADER VER:UNKNOWN
USB CONFIG:MTP,ADB
USER:ROOT
FS:UNKNOWN
BASEBAND VER:MOLY.WR8.W1315.MD.WG.MP.V43.P3, 2015/08/07 12:56
BUILD NUMBER:ALPS.KK1.MP7.V1
ID:KOT49H
REGION:US
LANGUAGE:EN
How to flashing Galaxy J1 SM-J100H clone with Sp flashtool ?
Step 1: Unduh and extract the stock firmware on your computer.Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Unduh Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
More detail can looking image below :
 |
| J100h Flashtool setting |
Free Unduh Firmware / Samsung Galaxy J1 SM-J100H Clone Flash File.
Download File => Link Server 1 | Size 350 MB
Download Password => Link Server 2
Notes : Do not Use Preloader File if the phone hardware information not same like show above, it will make your phone dead.
Look the image below for example :
