UFI Box Setup v1.2.0.399 | UFi BOX & UFi Dongle version 1.2.0.399 BIG UPDATE!!
UFI Software version 1.2.0.399 For UFi BOX & UFi Dongle Available
Introducing P2P(BitTorrent) support download
- Built with Aria2, to enable this function you have to allow the firewall to open when you're prompted to do so
- To prevent data corruptions, specially to users with limited internet connection, files bigger than 1GB should be downloaded using BitTorrent.
- Unduh tasks were cached, so you can resume later (Check "Autosave Unfinished Downloads" in Settings)
Introducing new app module: UFI CHIP Prog
- Used to work with SPI NOR Flash, SPI EEprom and I2C EEprom chip
- Support various type of chip with fast and easy user interface
- Support for Read, Write, Erase, Verify and Blank check as well as Unlock BP function for SPI Flash
- Usefull for BIOS recovery, Router flashing and so on
- Documentation and adapter coming soon
![to]()
Introducing UFI Box firmware version 1.10:
- To use UFI Software version 1.2.0.399, upgrade firmware to version 1.10
Support Files changes:
- Over 3.3TB compressed files uploaded to the support server
- Added many popular brands to Android directory
- Added New Schematics, QCN files and USB Drivers
eMMC ToolBox changes:
ADD: Auto retry handling in case of un-successfull "Read" because of chip's bad block
ADD: Auto set partition config based on firmware selection on Factory Image write.
ADD: SANDISK chip Smart and Health report
Android ToolBox changes:
ADD: Android SDK Path setting(adb.exe and fastboot.exe path)
ADD: Confirmation dialog before auto extracting firmwares
ADD: Special Task menu on the ADB Tab(removed Tool sub tab)
Most function requires devices to be rooted, This menus were dinamically changed based on the connected phone.
Implemented tasks:
- Clean Viruses
- OEM-Unlock
- [Xiaomi] Disable Mi Cloud
- [Samsung] Exit Factory Mode
ADD: Support for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
- Note that most of Helio SoC was fused during production time so -
some partition might be protected for erase and write, in this case only full erase allowed.
ADD: Special Task (MediaTek Tab) menus for:
- [Oppo] Clear Region Lock
- [Coolpad] Exit Factory Mode
- [ASUS] Disable Demo Live
ADD: Enabled erase function for Qualcomm firehose mode(as many users request)
ADD: Special Task (Qualcomm Tab) menus for:
- Full erase (factory erase userarea partition)
- Full erase including boot (erase user area, boot1, boot2)
- [Coolpad] Exit Factory Mode
- [Oppo] Exit Fastboot Mode
This is to fix stuck fastboot mode after change emmc
ADD: "Auto sparse" option on fastboot flashing
Some "system.img" files greater than 2GB may cause fastboot crashes(depend on the fastboot version)
If this option checked, files greater than 2GB will be "sparsed"
BUG FIXers:
- Special Task, Resize function was not handled correctly in some case.
- FFU routine improved, in some rare case ffu might not be performed correctly.
- Fastboot detection after reboot bug introduced in version 1.2.0.390
- Workaround for "delayed loading" when opening UFI Android ToolBox
UFI Dongles are now back on stock, get it at official distributors. Below are some useful links for get the latest setup for ufi box without the password :
MIRROR 1 [Download]
MIRROR 2 [Download]
MIRROR 3 [Download]
File Size : 319 MB
Upload : 23 / 4 / 2017
Hosted : Google Drive
* UPDATE : UFI Software version 1.2.0.407
UFI Software version 1.2.0.399 For UFi BOX & UFi Dongle Available
Introducing P2P(BitTorrent) support download
- Built with Aria2, to enable this function you have to allow the firewall to open when you're prompted to do so
- To prevent data corruptions, specially to users with limited internet connection, files bigger than 1GB should be downloaded using BitTorrent.
- Unduh tasks were cached, so you can resume later (Check "Autosave Unfinished Downloads" in Settings)
Introducing new app module: UFI CHIP Prog
- Used to work with SPI NOR Flash, SPI EEprom and I2C EEprom chip
- Support various type of chip with fast and easy user interface
- Support for Read, Write, Erase, Verify and Blank check as well as Unlock BP function for SPI Flash
- Usefull for BIOS recovery, Router flashing and so on
- Documentation and adapter coming soon
Introducing UFI Box firmware version 1.10:
- To use UFI Software version 1.2.0.399, upgrade firmware to version 1.10
Support Files changes:
- Over 3.3TB compressed files uploaded to the support server
- Added many popular brands to Android directory
- Added New Schematics, QCN files and USB Drivers
eMMC ToolBox changes:
ADD: Auto retry handling in case of un-successfull "Read" because of chip's bad block
ADD: Auto set partition config based on firmware selection on Factory Image write.
ADD: SANDISK chip Smart and Health report
Android ToolBox changes:
ADD: Android SDK Path setting(adb.exe and fastboot.exe path)
ADD: Confirmation dialog before auto extracting firmwares
ADD: Special Task menu on the ADB Tab(removed Tool sub tab)
Most function requires devices to be rooted, This menus were dinamically changed based on the connected phone.
Implemented tasks:
- Clean Viruses
- OEM-Unlock
- [Xiaomi] Disable Mi Cloud
- [Samsung] Exit Factory Mode
ADD: Support for MT6750,MT6755(Helio P10),MT6757(Helio P20),MT6795(Helio X10),MT6797(Helio X20)
- Note that most of Helio SoC was fused during production time so -
some partition might be protected for erase and write, in this case only full erase allowed.
ADD: Special Task (MediaTek Tab) menus for:
- [Oppo] Clear Region Lock
- [Coolpad] Exit Factory Mode
- [ASUS] Disable Demo Live
ADD: Enabled erase function for Qualcomm firehose mode(as many users request)
ADD: Special Task (Qualcomm Tab) menus for:
- Full erase (factory erase userarea partition)
- Full erase including boot (erase user area, boot1, boot2)
- [Coolpad] Exit Factory Mode
- [Oppo] Exit Fastboot Mode
This is to fix stuck fastboot mode after change emmc
ADD: "Auto sparse" option on fastboot flashing
Some "system.img" files greater than 2GB may cause fastboot crashes(depend on the fastboot version)
If this option checked, files greater than 2GB will be "sparsed"
BUG FIXers:
- Special Task, Resize function was not handled correctly in some case.
- FFU routine improved, in some rare case ffu might not be performed correctly.
- Fastboot detection after reboot bug introduced in version 1.2.0.390
- Workaround for "delayed loading" when opening UFI Android ToolBox
UFI Dongles are now back on stock, get it at official distributors. Below are some useful links for get the latest setup for ufi box without the password :
MIRROR 1 [Download]
MIRROR 2 [Download]
MIRROR 3 [Download]
File Size : 319 MB
Upload : 23 / 4 / 2017
Hosted : Google Drive
* UPDATE : UFI Software version 1.2.0.407
